Repair of Rear Mirror of Vintage Motorcycle (Moped out of 1956)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rear mirror was broken. So I replaced the mirror!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
So, my friend came with a broken mirror glas.
I drew with a sharp pencil the outer contour. I scanned this sketch and with CorelDraw! I turned it into a svg (by trace-function).
Imported the svg in TinkerCad and redrew with aid of the "sketch" tool. Once I had this I shrunk it a bit to a possible plate, which represented the mirror. Thickness I chose 3mm, as I expected the mirror glas to be 3mm. I printed this, corrects once and printed again. This fits now. I could move the plate in and out of the mirror comfortably.
Now I created a number of several plates, all bit by bit getting smaller toward top. That should become my TPU-mirror frame (fringe that holds the mirror in place. A smaller piece was created with 10mm thickness, which I turned into a hole and cut the other plates (centered before!). Now I had a staged frame. With the two parts I could check if this would fit into the rear mirror holder. A bit of corrections and I was done.
Now I bought a 3mm thick mirror glass and cut it out carefully with a glass cutter. Unfortunately there were two cracks, one minor and a deadly one. The crack got longer and longer, so I decided to change from glass to 2mm acrylmirror. Once I received this I cut it with a manual jigsaw. Which turned out quickly and without any problem. After some rough sanding it fitted perfectly. I added a 2mm foam tape around the mirror from the underside, slipped it in and put the TPU frame in. Looks great! Hope it helds for a time.
About Acryl mirrorglass I do not have any concerns about durability as this valuable "Moped" is under best conditions and not outside, when it is ugly.
Printed on my MK4 and TPU on my MK3.
Explore my other Printables: https://www.printables.com/de/@Tritschi
Kreidler fans here are some interesting emblems: