1 / 3
Doctor Who mini playfield bracket (03-8655 / A-15500 compatible) — zdjęcie 1
1 / 3

Doctor Who mini playfield bracket (03-8655 / A-15500 compatible)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Base of Doctor Who mini playfield 2nd level mushroom targets. Reinforced version.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — NoDerivatives

This is a replacement part for Doctor Who pinball machine's mini playfield 2nd level target bank body. This part will receive noticeable punishment, so it has absolutely to be printed out of something that can take it. PA or PA-CF recommended, but I'm curious to hear how other materials fare. With PA the original mushroom targets slide nicely in there.

The holes for the target are intentionally a bit tight, as 3D printing in most cases will deform the holes slightly. File as needed.

Print this on its side for optimum layer orientation. Around 0.2mm layers are fine. No supports needed, use a brim if necessary.

If you need the opto boards, you can get the ready for order version for PCB manufacturers here:

https://codeberg.org/apzpins/dw_mini-pf_opto_card

Tagi