1 / 2
Modular Cylinder for Nerf Rev-6 Maverick V1.4 [BERKANA] — zdjęcie 1
1 / 2

Modular Cylinder for Nerf Rev-6 Maverick V1.4 [BERKANA]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular cylinder for the Rev-6 Maverick allowing the use of N-Series (N1) darts or half darts

Ocena
0 / 5
Polubienia
17
Pobrania
19
Wydruki
0
Wyświetlenia
350
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Modular Cylinder for Rev-6 Maverick

Barrel Inserts for

  • N-Series Darts

  • Half Length Darts

Part of my learning of F360, I cooked up this cylinder that can be swapped for the Rev-6 Maverick's Cylinder. I've played with this mod during a number of local low fps pvp games and it's supa fun. 
this whole thang is kinda experimental and there's a good chance I'm gonna redo it soon!

Performance statistics
[Incoming]

This is not compatible with Corvus's Barrel Inserts as it uses different diameters 

Attach suitable O-rings to the grooves of the barrel inserts to seal them in the cylinder. I've found O-rings sized for half-dart pushers on breach-loading springers to work best. 

Assembly instructions:
[Incoming]

! Print Settings !

Do not print the cylinder too heavy! The rotation mechanism on the maverick tends to be pretty weak

Make sure your printing is level! If the bottom of the print is not flat, it will dramatically affect the seal. 

I printed PLA, 3 walls, 15% infill and upgraded the spring in the rotation mechanism and cylinder spring. 

----------

Huge thanks to Corvus for the barrel insert design!!

Tagi