250 mL Laboratory Flask Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
250 mL Flask Holder This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your…
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 180
- Wydruki
- 0
- Wyświetlenia
- 1201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
250 mL Flask Holder
This flask holder is meant to hold 250 mL flasks in place on an orbital shaker, assuming your shaker has screw holes to attach flask holders.
I remixed this 250ml Conical Flask Holder, making the following changes to the original design:
- Made base narrower for a better fit to our 250 mL flasks
- Adjusted the angle of the holder arms to be more vertical since the base is now narrower
- Added a screw hole to the bottom to attach to a shaker
The two pieces should be printed laying down for the best strength and easiest print. I recommend printing with 1.2 mm walls (3 walls with 0.4 mm nozzle) and at least 20% infill for strength.
The pieces can be fit together when screwing them onto a shaker, or you are removing them occasionally, you can glue the pieces together with a drop or two of super glue.
Links
Source: 250ml Conical Flask Holder
Tinkercad: 250 mL Flask Holder
Print Settings
Printer:
Monoprice Select Mini
Rafts:
No
Supports:
No
Resolution:
0.175 mm
Infill:
20%
Notes:
1.2 mm walls
Category: Biology