NODE MCU V3 Case with OLED 1,3" Display - ESP8266 Universal Desktop Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display.
- Ocena
- 4 / 5
- Polubienia
- 21
- Pobrania
- 166
- Wydruki
- 1
- Wyświetlenia
- 1602
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a little desktop case for a ESP8266 NODE MCU V3 Board, and a 1.3" OLED Display.
The backplate is supplied in three differnt versions:
- With hole for a DHT22 Temperature/Humidity Sensor
- With mounting points for Adafruit Breakout Boards like the BME280
- With a closed back
There is a lot of space inside the case, so no problem to add more stuff.
All parts print without any support in the shown orientation.
Assembly Instructions:
The OLED display is press-fit. It can be secured with two little drops of Cyano-glue or similar glue.
The NODE MCU board is press-fit into the slots inside the case, pins are directed upwards.
The two parts of the case are screwed together with M2,5*8 screws from the bottom and the back.
Category: Electronics