1 / 9
Card Holder — 8 Hero vs Villain Sandwich Pairs — zdjęcie 1
1 / 9

Card Holder — 8 Hero vs Villain Sandwich Pairs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2-piece sandwich card holder for a 55×85 mm card. 8 hero/villain silhouette pairs (Thor/Loki, Knight/Dragon

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
23
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution

Two-piece sandwich card holder for a 55 × 85 mm card (standard business / playing-card / loyalty-card size). Outer shell carries a hero on one side, villain on the other — eight matched pairs:

  • thor_loki_*.stl — Thor's hammer / Loki's helmet ✓

  • batman_superman_*.stl — Batman logo / Superman logo ✓

  • cat_dog_*.stl — Cat / dog ✓

  • harry_voldemort_*.stl — Harry's lightning scar / Voldemort ✓

  • vader_yoda_*.stl — Vader / Yoda ✓

  • (SCAD only) knight_dragon, rrh_wolf, gandalf_balrog — re-render from the bundled card_holder.scad via ./build.sh --all

Loose and easily disassemblable — the back plate has 12 friction posts that mate with detents on the front plate. Push together firmly to close, twist + pull apart to open and swap the card. No tools, no glue.

To print:

  1. Print both <pair>_front.stl and <pair>_back.stl of the chosen pair. Outer (silhouette) face DOWN on the bed for the cleanest surface — silhouette is engraved 1 mm deep.

  2. Drop the card into the back plate's recess (right-side up).

  3. Press the front plate over the back; the 12 friction posts click in. Wiggle to seat fully.

Two-colour print (silhouette in a contrasting filament): the included card_holder.scad source has a pair= variable and build.sh script. Each piece can be re-rendered as a multi-named- solid combined STL → drop into Bambu Studio and right-click → Split to Parts to assign a separate filament to the silhouette. The supplied .stl files are single-solid versions for one-colour printing — re-run build.sh from the .scad if you want the multi-filament path.

Dimensions:

  • Outer slab: 70 × 100 × 6 mm assembled (back 3.5 mm + front 2.5 mm).

  • Card recess: 55.5 × 85.5 × 1.4 mm (fits a standard 55 × 85 × ~1 mm card with light slop).

  • 4 carabiner-shaped holes on the long sides, 2 keyring holes at the top corners — clip to a bag, lanyard, or split-ring.

Print profile (Bambu Lab P2S, PLA, 0.4 mm nozzle, 0.2 mm layer):

  • Both pieces flat, outer face down, no supports.

  • 4 perimeters / 30 % infill — keeps the slim 2.5 mm front from flexing.

  • One pair takes ~50 min and ~25 g of filament.

Each plate is also pierced by 4 carabiner holes and 2 keyring holes, so the assembled holder doubles as a clipped-on ID badge or as a key-ring decoration with a hidden card slot.

Tagi