xy pipe connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
lightweight 3d-printing optimized connector for two pipes
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Share Alike
A connector for pipes.
I do not know yet what it is for. It is a sturdy yet lightweight connector for pipes for kids to build houses or forts. It tries to be optimal for 3D printing.
Intended for 20mm electrical pipes, but can be scaled according to your needs.
there are 4 different wall thicknesses provided. see it more as a way to adapt it to your needs when you scale it. The second part of the filename indicates the wallthickness in mm
Should be printed on the flat side
It might be wise to use the arachne wall generator.
It is wise to use random seems
it is wise to check your printers capabilities in terms of overhangs in inwards curves. If you have trouble just reduce layer height.
Remix
from the provided step file if you like.