1 / 2
An ESP32CAM box that mounts to the end of an XL arm — zdjęcie 1
1 / 2

An ESP32CAM box that mounts to the end of an XL arm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Three part holder for an ESP32CAM that mounts on the end of the PrusaXL arm and is adjustable.

Ocena
0 / 5
Polubienia
1
Pobrania
2
Wydruki
0
Wyświetlenia
40
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I made up the ESP32CAM from the Prusa Blog and decided I wanted my own box. 

It is a very slim model with a joint at the back. Ports for the power cable, an SD card, and both reset buttons are included in the model. Reset is marked with an R. 

Print everything laying down flat for most strength. You may need to file the pins on the back of the ESP32CAM support frame down a bit. Some of them stuck out really far.

It works well to see the whole bed at tool height. 

You need an M3x12 screw to replace the screw in the printer arm and an M3x10 and nut for the flexion joint. 

Now updated with a nut holder for the stand and a little more room in the box.

Tagi