Heltec T096 Modular Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular Mid antenna case for the T096 featuring a 3000mah battery compartment or a single 18650 battery compartment
- Ocena
- 4,5 / 5
- Polubienia
- 31
- Pobrania
- 249
- Wydruki
- 3
- Wyświetlenia
- 1808
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
These are all in the alpha phase, just wanted to whip something up for this new device.
Please offer advice, changes, makes and print settings. I've created all these in tinkercad sooooo... yeah.
I don't have specific print settings as these are all prototypes and quick prints. I recommend PETG or anything stronger than silk PLA.
My current settings are .6mm nozzle @ .16mm layer height. .3mm prints okay.
The tolerances are pretty tight, the USB side slides in first at a 45deg angle and then the antenna side pops in.
T096 3kBrick
Battery compartment based off of Meshnology 103665 3000mah spicy pillow
M3x20mm and 4 nuts
Three piece case. Cover, Mid and 3kbrick Back. Plus 2 buttons
T096 18650
Fits a single Li-ion 18xxx battery
4 m3x20mm screws and 4 m3 nuts
feels nice in the palm
Three piece case. Cover, Mid and 18650 Back. Plus 2 buttons
Short button sits flush or slightly below the cover,
+1mm button, well it sits higher.
Hardware
M3 nuts and bolts. Just what I had laying around. Made for socket caps but flat countersunk looks pretty good. Might have to trim some of the bolts or do your own. Threaded inserts might be the way to go here. let me know!?!