2-in-1 Wavy Pastry Pocket Maker & Dough Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clever 2-in-1 kitchen tool: one side guides your filling perfectly, the other side cuts a beautiful wavy pastry pocket!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
Make perfect sweet or savory pastry pockets with this clever 2-in-1 dough cutter and filling mold! Inspired by the smart design of the Betty Bossi pastry cutters, this tool ensures your filling stays perfectly centered and your edges are cut neatly with a beautiful wavy pattern.
Ideal for puff pastry, empanadas, or filled cookies.
How to use it (The 2-in-1 Design)
The Filling Side (Top): Place the rectangular wall-side down onto your first sheet of dough. Use the square area to scoop in your filling. The wall acts as a guide, preventing the filling from spilling over the edges and ensuring you have clean dough margins for sealing.
The Cutting Side (Bottom): Remove the tool, place your second sheet of dough on top of the filling, flip the tool over, and press down using the wavy edge. It perfectly cuts the dough while the flat inner flange presses the edges together to seal the pocket!
Recommended Print Settings This model has been optimized for 3D printing with a sharp chamfered cutting edge. To get the best results, please follow these slicing instructions:
Orientation: Print the model upside down (with the sharp wavy cutting edge touching the build plate).
Material: PETG is highly recommended over PLA. It can handle warm water for cleaning and is generally more suitable for kitchen tools. (Note: 3D printed parts are porous. Always wash thoroughly or wrap dough in cling film if you want to be 100% food safe).
Adhesion / Brim: advisable because the cutting edge is chamfered to act as a blade, there is very little surface area touching the build plate.
