Tungsten electrode holder / storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is designed to hold and secure tungsten electrodes for TIG welding. The maximum electrode size is 91 mm.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Standard Digital File License
There are 2 options:
model with holes for magnets on the bottom and model without these holes. The top of the model is the same for both versions.
The case has the following dimensions:
outer diameter - 26.5 mm
inner diameter - 18 mm
total height - 105 mm
maximum length of the tungsten electrode: 91 mm,
the case has a simple thread.
Diamond pattern for better grip.
For the version with magnets, use Ø4 x 2mm (height) magnets, which must be pressed into the bottom of the case using a pin punch for example and hammer. You will need to apply moderate force, but please be careful. You can also apply a drop of glue under the magnet, though this is not necessary.
The photos with the logo are for illustrative purposes only. If you want to use the logo as shown in the image, I've attached the SVG file.
If you have any further questions, I'd be happy to answer them.