1 / 3
Ennoid MK8-LCM mount plate for Onewheel Pint controller box — zdjęcie 1
1 / 3

Ennoid MK8-LCM mount plate for Onewheel Pint controller box

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The mood. boards Ennoid MK8-LCM mount plate is designed to securely house the LCM and status LED strip.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Mounts an Ennoid MK8-LCM and status bar LED strip to the Onewheel Pint (X/S) controller box. Originally designed for the Quality Pint S project.

Use the original controller box screws to mount the plate inside the box. To mount the LCM, use 4mm M2 thread-forming button or pan-head screws, such as these. Screw them in slowly and steadily so as not to destroy the posts.

Adhere the LED strip along the printed guideline. It should not stick up more than a few millimeters.

Notes:

  • LCM power should be facing the tire, otherwise there is a large component on the underside of the LCM that will collide with the screw head. If the flipped orientation is required, the screw underneath is optional.

  • Use insulative tape on the edges of the LED strip to prevent shorting with the side of the metal box.

  • Use insulative tape on the head of the screw that sits under the LCM to reduce risk of shorting.

  • Print at 0.2mm layer height in a heat-tolerant filament such as ABS for best results.

  • Compatible with the Carve Workshop ESC Controller Mount.

Tagi