Self-Aligning Filament Guide for Prusa MK3s MKS3+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This bending holder is designed to improve filament guidance during 3D printing.
It features a flexible mast that can bend slightly and rotate freely, allowing it to automatically align with the current filament feeding direction. This helps reduce friction and unwanted tension on the filament path while the printer is operating.
The rotating and flexible design allows smoother filament movement, especially when the filament angle changes during printing. The holder is compact, simple, and intended for the Prusa MK3 Series
No need to unload filament before insert.
Bends a little to unburden extruder entry when spool is blocked
Filament guided parallel to extruder feed point (over the X moving range)
Rotates 90° to material transport direction for optimal bending
Can be printed w/o supports, the honeycomb structure saves much filament and print time.
M2.5 x 12mm Bolt and Nut needed (bolt can be longer). Some Loctite, nail polish etc. recommended to secure the nut.
Replace the clamp (lower) part for use on other printer models.
More stable version added, the original one bends too fast in daily usage
Updated from this initial version: