Insert for Blackout: Hong Kong
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An insert for Blackout: Hong Kong (A board game by Alexander Pfister). Works with sleeved cards. Store vertically.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was made using openscad using a combination of dppdppd's excellent Boardgame-insert-toolkit (https://github.com/dppdppd/The-Boardgame-Insert-Toolkit) and a wrapper of my own to add sliding magnetic lids, you can find the source here: https://github.com/DanForever/board-game-inserts.
Each box has slots for 3x2mm neodymium magnets. I found that a single pair wasn't really enough to hold the lid in place so I added 2 sets of slots to each box (so 4 magnets per box).
However, these magnets are entirely optional and you may find that the friction between the lid and the box to be enough to hold it in place.
You will need:
4x Playerbox (and lids)
1x Coinbox (and lid)
1x Cardbox (and lid)
1x ScoutTiles (and lid)
1x Cardbox-Spacer - this fills in the left over space and stops the insert from sliding around
The insert fits entirely inside the card insert that comes with the box, so don't throw that out!