1 / 1
Car Waste Bin (designed for Jaguar i-Pace)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model uses a modified version of the parametric Easy Thread Container + Lid to make a waste bin for a car
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A container which screws into the baseplate to provide an easily removable container for rubbish in a car. This was specifically designed to fit into a Jaguar i-Pace but could be easily modified to fit most cars. The baseplate is held in place by two small self-tapping screws which screw into the carpet and it also tucks under the trim below the back seat of the car.
I made it in PLA but if your car is likely to get very hot in summer PETG may be a better option.

