Handlebar tab
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tap that attaches to the handlebar when you need to turn the bike upside down for maintenance
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a simple pad that attaches to the handlebar of a bike to protect the components when you need to turn the bike upside down for maintenance.
When the bike is upside down, the points of contact with the ground will be the two pads on the handlebar and the saddle.
The pads attach to the handlebars and can be easily adjusted so they don’t get in the way while riding.
When necessary, they can be easily rotated into their working position.
P.s. You will need two units to be mounted on either side of the grips.
You will also need:
2 x M3 x 0.5 x 10 mm Hex-Drive Flat Head Screw ( https://www.mcmaster.com/92125A130/ )
2 x M3x0,5 Hex Nut ( https://www.mcmaster.com/91828A211/ )
Print instructions:
- orientation: laying on the side, as it comes from STL
- supports: none
- layer hight: 0,2 mm
- Filament: TPU
Tip: If you prefer to use self-locking nuts instead of standard ones, I suggest you secure them with adhesive. TPU is a soft material, and the nut may rotate under the torque of the screw.