1 / 2
Phailozoo to Elegoo Marsmate DIY Fumehood Adapter — zdjęcie 1
1 / 2

Phailozoo to Elegoo Marsmate DIY Fumehood Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows you to connect an Elegoo Marsmate air purifier to a Phailozoo to use it as a resin epoxy fumehood.

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

My partner has an epoxy resin home business, but the fumes from the art are unpleasant and unhealthy. However, the weather here is rarely good enough to do the craft outdoors. As such, I went looking for fume-hoods for our hobby room for her to use. Unfortunately, they're all quite large and expensive.

I then remembered that people print resin in their homes all the time. (I've thus far only done FDM) So I figured maybe air filters for SLA printers may be able to filter the air. I settled on the Elgoo Marsmate based on reviews, price and the size of the filter. But I knew I'd also need an enclosure.

I realized aquariums are already big glass boxes and that they even make some with front opening doors! I settled on the Phailozoo 50 gallon reptile enclosure as the dimensions worked well for our work benches, it has a sliding front door for easy access and it has a big hole on either side for running wires that appeared to be similar to that of the Marsmate hose. The top is mesh, but can be covered with an acrylic sheet. (Or even the foam it comes packed in)

Now, unfortunately, the hose is not a perfect fit for the hole in the side of the enclosure, but that's where this adapter comes in! This adapter replaces the inner part of the cable passthrough that you'd normally turn to open up more smaller holes. It clips in the same way as the original. The Marsmate comes with a part you can mount to your FDM printer's enclosure, this 3D printed part re-uses the rubber part of that, which slides right into the print. After that, the hose connects nicely to the enclosure.

With a properly cut acrylic sheet (34.25" × 16.25" for the 50 gallon tank) fitted over the mesh top, this thing far exceeded my expectations! It was experimental, so I was fully prepared for it not to work, but the smell is nearly non-existent, even when my partner is actively working in there with the door open. When it's closed, I don't smell anything! Since it works so well, I wanted to share this model in case it helps others.

I'm sure this fume-hood can be used for other things as well, but I probably wouldn't recommend it for chemistry stuff for example. I know the filter is designed for resin which is why I chose it. I cannot guarantee its use for anything else specifically.

Tagi