1 / 2
Remix of DAS Filament REFILL 1kg Masterspool for Laser Cutter — zdjęcie 1
1 / 2

Remix of DAS Filament REFILL 1kg Masterspool for Laser Cutter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesigned the 1kg Spool to be partially laser cutted to save on print time

Ocena
0 / 5
Polubienia
4
Pobrania
12
Wydruki
0
Wyświetlenia
88
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

MDF Master Spool Redesign (Laser Cut)

This is a remake of the Master Spool, specifically optimized for laser cutting. The side panels have been redesigned to be manufactured from 3mm MDF and are assembled using screws for a robust, durable build.

Key Changes

  • Material: Optimized for 3mm sheet thickness (MDF, plywood, or acrylic).

  • Assembly: Designed for a secure screw-fit. The screws are self-tapping, meaning they thread directly into the core without the need for pre-tapped holes or hex nuts.

Bill of Materials (BOM)

To assemble this spool, you will need:

  • 12x M5 x 12mm Button Head Screws (ISO 7380)

  • Laser-cut side panels (files included)

  • Compatible printed spool core

Assembly Notes

  • Self-Tapping: The M5 screws will cut their own threads into the printed core. Drive them in slowly to ensure a clean, tight fit.

  • Low Profile: Button head screws are used to maintain a low profile, ensuring the filament does not snag on the hardware.