1 / 2
4th Gen Tacoma Softopper front snap mod — zdjęcie 1
1 / 2

4th Gen Tacoma Softopper front snap mod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This gives the 4th gen Tacoma a way to use the rail for the front snap attachment of the Softopper

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The Softopper gives you two methods to attach the front of the vinyl to the bed.  The velcro is notorious for not sticking well, and I didn't like the idea of drilling snap heads directly into the bed wall.  This mod uses the rail to give the snap a place to attach that is removable and non-destuctive to the bed.

I used an M4 heat set thread and M4x20 bolt to attach the two pieces.  I needed a total of 3 of these assemblies in total.

Tagi