1 / 5
Reveni Spotmeter Mk2 - IR-Cut Filter Adapter & Lens Hood — zdjęcie 1
1 / 5

Reveni Spotmeter Mk2 - IR-Cut Filter Adapter & Lens Hood

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

IR-Cut filter holder and hood for Reveni Mk2 spotmeter. Fixes inaccurate infrared readings on vegetation.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

The Reveni Labs Spotmeter Mk2 has sensitivity to infrared light, which causes inaccurate readings on IR-reflecting subjects like vegetation. When comparing it to a standard digital camera, the Mk2 can underexpose grass or foliage by 1 to 1.5 stops.

To fix this, I designed this IR-Cut filter holder that includes a built-in lens hood to prevent sun flares on the glass. It is designed to fit a filter that is 10 mm in diameter and 0.55 mm thick, though similar thicknesses should also work fine.

While the press fit holds relatively well on its own (notch at the bottom) , I added a tiny drop of flexible adhesive (like T-7000 glue) to keep it fully secure while still being easy to remove later if needed.

Because the filter slightly reduces overall light transmission, you will need to adjust the meter's calibration in the settings. For reference, my factory calibration was set to +0.1 EV, and I adjusted it to +0.4 EV to compensate once the filter was installed.

Tagi