Linhai Hytrack water pump seal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Linhai Hytrack 260 water pump seal.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
While maintaining my Hytrack 260 quad, I happened to open the water pump and see that the actual seal was in a really bad shape.
As I did not want to buy a new one, and did not found a STL file on the internet or the seller, I took upon myself to make one.
So here I am !
It is not a piece of art, and could certainly be perfected by anyone better than me at design, bu at least, it works !
As far as I know, it is the same piece for Linhai Hytrack 260 / 265 (H) / 300 / 400.
Beware, the STL is a 10mm high piece, it needs to be shrunk to 1mm when slicing.
Printed in TPU 95A, 1mm, 100% (obviously for 1mm)