Climbing Gear Rack / Organizer (Parametric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A parametric rack designed to organize climbing gear (quickdraws, carabiners, slings, belay devices, prusik cord...).
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 299
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
A lightweight, fully customizable rack designed to organize climbing gear such as quickdraws, carabiners, slings, belay devices, prusik cord, and more.
This is NOT a Personal Protective Equipment (PPE).
Do not use it for belaying, rappelling, anchoring, or any safety-critical application.
This model is intended for gear storage and organization only.Avoid using filaments containing abrasive additives (such as carbon fiber, glass fiber, glow-in-the-dark, or metallic particles), especially if ropes, slings, or cords may come into contact with the rack.
This model is fully parametric, allowing you to easily adjust:
Top row hole count (used to hang the organizer with carabiners or slings)
Bottom staggered rows hole count (for quickdraws, carabiners, or other gear)
Hole diameters (top and bottom rows are independent)
Hole spacing (top and bottom rows are independent)
Organizer thickness
Designed specifically for 3D printing, with no excessive overhangs (maximum 45° on all rounded profiles and chamfers).
What can you change?
Download the Fusion 360 design file, open it, then go to Solid → Modify → Change Parameters to customize it.
Parameters
Parameter | Default Value | Description |
bottom_holes_count | 19 | Number of bottom rows holes (quickdraws, two bottom rows). If a even number is provided, an extra hole will be added.
Minimum: 5 |
bottom_holes_diameter | 15 mm | Bottom holes diameter (quickdraws). |
bottom_holes_distance_horizontal | 10 mm | Horizontal distance between bottom holes (quickdraws).
Keep lower than 'bottom_holes_diameter'. |
bottom_rows_diagonal_distance | 5 mm | Diagonal distance between bottom rows. |
top_holes_count | 3 | Number of top row holes (carabiners).
Minimum: 2 |
top_holes_diameter | 18 mm | Top holes diameter (carabiners). |
top_holes_distance_horizontal | holes_wall (5 mm) | Horizontal distance between top holes (carabiners). |
holes_fillet | 2.5 mm | Fillet base for all the holes. |
holes_wall | 5 mm | Thickness of the walls around all the holes. |
rack_edges_chamfer | 1 mm | Chamfer for the edges. |
rack_spacing | 5 mm | Spacing between the top row and the two bottom rows. |
rack_thickness | 10 mm | Overall thickness. |
Overhangs & Printability
This model is made for FDM 3D printing, avoiding any excessive overhangs.
Gear holes use rounded printable profiles starting at 45° to reduce firsts layers deformation.
The organizer is using 45° chamfers for the edges.
Printing recommendations
For heavier climbing gear, PETG, ASA or ABS are recommended.
Increasing wall count is preferred over increasing infill for better strength and durability.
If you experience adhesion issues, make sure your build plate is thoroughly cleaned.