Chevy Astro GMC Safari fan shroud air cleaner grommet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The rubber grommets were disintegrated on my 1998 Astro. I created a model for new ones and printed them using TPU…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The rubber grommets were disintegrated on my 1998 Astro. I created a model for new ones and printed them using TPU since replacement are crazy expensive. I recently replaced the fan shroud with an aftermarket and had to make the grommet shorter and the opening wider to fit. I included both. Use the most flexible TPU you can. I used tree supports to be able to print the inside lip correctly. You may have to experiment with settings to get it to print for your needs.
Category: Other