Makita LXT Signal Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for Open Battery Information (OBI)
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 182
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I built the "Open Battery Information" arduino connector for resetting locked Makita LXT Batteries. It can also unlock batteries if the cells are ok. - See video of @Well Done Tips!
https://github.com/mnh-jansson/open-battery-information
Found this CAD model of the makita signalconnector with all wires and contacts.
I reduced it to the plastic part and converted it to a printable stl model. For the Open Battery Information Project I made the 2 needed electrical contacts out of 1,5mm installation wire. - Just use 2 approxmately 25mm long pieces of wire. Straigten them and solder the 2 connections for the arduino nano to one end. make a sharp 90° bend and insert them into the signalconnector housing.
I also used this housing for the arduino which provides the ground connection of the adapter:
https://makerworld.com/de/models/2087559-makita-18v-battery-unlock-device-obi#profileId-2256293
The makita signalconnector snaps into it (very tight - you can use a file to make it fit more easy)
More Information here:
OBI Desktop Software:
I had to use the python sources of the OBI (see instructions) in a virtual invironment (venv) because the provided windows exe-file cannot be used - it causes a virus alarm and will not start - even if you turn off defender. (https://docs.python.org/3/library/venv.html)
Credits to all the makers/creators and their great work !