nyacom's AMD BC-250 Industrial Style Case (Without stock cooler modification)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another AMD BC-250 case
- Ocena
- 5 / 5
- Polubienia
- 161
- Pobrania
- 548
- Wydruki
- 3
- Wyświetlenia
- 9251
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Introduction
This repository is Meanwell LRS-350-12 Version. If you are looking for FlexATX version, please check this out. ⚠⚠⚠
A compact industrial-style enclosure designed for the AMD/ASRock BC-250 accelerator.
This case was built around the original BC-250 heatsink, allowing the card to be installed without any heatsink modification or custom cooling hardware. The side-flow airflow design uses a large intake fan to push air directly through the stock heatsink for efficient cooling in a relatively compact enclosure.
The enclosure is designed around the Mean Well LRS-350-12 DC power supply which can easily you can find in Amazon
Despite the compact footprint, the case can also accommodate an optional internal 3.5-inch HDD for large local storage capacity for AAA title games — ideal for DIY steam machine or local LLM node.
Even with a single-fan cooling design, the enclosure maintains BC-250 temperatures around ~70°C under gaming load.

Updates
08/02/2026
Updated front and rear body sections for better rigidity (added screws to connecting front and back sections)

06/13/2026
Improved for power cable management of rear body
Fixed misaligned BC-250 fixture hole
05/28/2026
FlexATX version (working in progress) available!
05/13/2026
Added rear panel vents to improve airflow to the PSU
Improved the AC-01 fittings on the rear panel
Added a removable magnetic front cover with a new design, along with rail system. This can be retrofitted onto the existing front body. Requires 12pcs of 8mm x 2mm neodymium magnets (Amazon)

Added a new design HDD mounter for 3.5 and 2.5 drives
Features
Fully 3D-printable enclosure
Designed specifically for the AMD/ASRock BC-250
Compatible with the Mean Well LRS-350-12 PSU
Uses the stock BC-250 heatsink without modification
Compact side-flow cooling layout
Optional support for a 3.5-inch high-capacity HDD
Print Notes
PLA or PETG is recommended
(high-temperature-resistant materials are not required)5% infill is generally sufficient, but adding extra walls around self-tapping screw holes is recommended for better durability
Misc
Custom WoL (Wake-on-lan) module project for BC-250 (Github)
FlexATX version
Under development.. (I hope it coming soon... Now I'm waiting for coming my another BC-250 board from eBay...) I totally reworked for FlexATX support within the exactly same geometry of LRS-350-12 version and better cable management..
Assembly Notes
The stock fan direction of the LRS-350-12 PSU may need to be reversed for proper airflow within this enclosure. Change the fan orientation from intake to exhaust by opening the PSU cover and flipping the fan.
With a new design of back panel (with vents), you don't need to do this :)
How do I wiring?
Here is an example wiring chart. Please choose appropriate fuse for AC-01 in your AC environment.

How to insert magnets to front cover / rails?
I think the magnet insertion step is the most difficult part of the assembly process. This guide shares my method for assembling this part. I recommend using a small quick bar clamp. You can find one at almost any hardware store. (I bought mine at Dollar Tree for $3.)

Apply a small amount of super glue inside the magnet hole (if needed), place the magnet on the hole, and then clamp them together.


After all magnets are inserted, place the part on a flat surface and clamp it together to ensure everything is flat and properly aligned.


Required items
For body
M3 x 8mm self-tapping screws x12
120x120x25 12V PWM Fan with high static pressure (Typically Arctic P12 Pro (Amazon))
#6 self tapping screw for fan mounting x4
Long-reach (30~40cm) #2 Phillips screwdriver
PSU installation
M4 x 8mm screw x2 (#6-32UNC screws are also usable)
AC-01 fused 3-pin AC power socket (Amazon) x1
20cm 8pin PCIe power cable x1 (Amazon)
AC Wires
Wire ferrules / screw-terminal wire connectors (Amazon)
BC-250 installation
#6-32 UNC mounting screws x1
Optional HDD mounting
M3 x 8mm self-tapping screw x3
#6-32 UNC HDD mounting screws x3
Assembly
1. Install the cooling fan into the rear body section

2. Slide the BC-250 and PSU into the rear body, then connect power cables for the BC-250 and cooling fan

3. Wire the AC power socket to the PSU, install it into the rear panel, then secure the rear panel to the rear body using four M3 self-tapping screws

4. Join the rear body and front body sections, then secure them together using three M3 self-tapping screws (Note: You may need a long reach screw driver to do this)

5. Secure the PSU to the front body section using two M4 screws

6. Attach the front cover to the front body using two M3 self-tapping screws

7. Attach the front panel to the front body using four M3 self-tapping screws

8. Secure the BC-250 to the front panel

Foot note
This project is totally my Sunday project. However I took a lot of trial and error to develop.
If you’d like to support future improvements or to help buy me rolles of filaments (ko-fi), I’d really appreciate it 😭.
I’m just happy people are enjoying hack a day!
