1 / 5
Wurkkos HD03 Anti-Glare-Cap + Clip-Lock — zdjęcie 1
1 / 5

Wurkkos HD03 Anti-Glare-Cap + Clip-Lock

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use this push-in shade to avoid blinding oncoming cyclers. Locks the clip and prevents accidental open

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
38
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Wurkkos HD03 Flashlight Torch Shade - Locks the Clip - FreeCAD Model

Use the Wurkkos HD03 as Bicycle Light. Use this push-in shade to avoid blinding oncoming cyclers.Additionally it locks the clip and prevents accidental opening.

Description

I like using compact flashlights as bicycle lights. They are bright, rechargeable, energy efficient and removable which is handy off the bike.

Unfortunately, most bicycle lights don't think about oncoming traffic. Use this shade to show you care about your fellow road users and avoid blinding them with your light.

This clip-on shade helps reduce glare by blocking the upper part of the beam. It slots into the space between the Wurkkos HD03 and it's clip and thus also acts as a lock for the flashlight's clip.

The model was designed in FreeCAD, and the source file is included so it can be modified or adapted.

see Also

Features

  • Shade for the Wurkkos HD03

  • Locks the Clip

  • Helps prevent blinding oncoming traffic

  • Useful when using the HD03 as a bicycle light

  • No modification of the flashlight required

  • FreeCAD model included

Printing

  • Material: PLA or PETG. (use black PETG if you want UV-resistance outdoors)

  • Support: yes. Use Paint-On Support from .3mf

    • Paint-On supports in the middle of the clip but leave space to the walls, so it's easier to remove.

  • Wall strength / perimeter count: recommend 4-5 with 0.4mm nozzle, 3 with 0.6mm nozzle, for strength

  • Brim: no

  • Infill: depends on desired weight. Strength comes from perimeter-count. Even 15% lightning worked fine.

  • Orientation: print 30° angled, standing up

This is part of a set of flashlight mounts

FreeCad Source File

Please upload your remixes here and/or post suggestions.

To make it easier for you to remix or make small modifications, I always upload the FreeCAD source for my models. For this model you can find it here.

License

Creative Commons Attribution-ShareAlike 4.0 International — CC BY-SA 4.0

  • Share with others

  • Don't keep your modifications to yourself

  • Always attribute the source!


Tagi