Caps (TPU) for 8in1 charging cable (Deans/T-plug, XT60, Tamiya Mini, TRX, EC3) and XT30 F
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've bougth SKYRC B6neo 2 charger that comes with 8-in-1 charging cable and was shocked…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I've bougth SKYRC B6neo 2 charger (awesome thing!) that comes with 8-in-1 charging cable and was shocked that the cable does not have any caps so it is very easy to short curcuit when charging batteries.
So I modelled caps for most of the cable's the connectors:
Deans/T-Plug (Male);
EC3 (Male);
Tamiya Mini (Male?);
TRX (Male);
XT60 (Male);
Bonus: XT30 (Female) -- that is on batteries I use.
The caps are designed to be printed in TPU only and they will not fit if printed in PLA/PETG/etc. If on your printer the caps are too loose/tight -- just scale it in sliced in XY.
STEP files included.
I printed from Orca Slicer and for Deans, Tamiya Mini, TRX and XT30 used random seam position and fuzzy skin with the following options: Contour only, Displacement + Extrusion, Classic, Distance: 0.1mm, Thickness: 0.1mm. This way the caps will be rugged outside and so not too slippery when you trying to remove them.
P.S. I'm using the charger mostly with XT60 F to XT30 M adaptor, not with this charging cable.