1 / 3
Prusa I3 MK2/MK2s Filament Guide (wide slot) — zdjęcie 1
1 / 3

Prusa I3 MK2/MK2s Filament Guide (wide slot)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slot type filament guide, useful if you print tall objects and full 1kg spool Update 2018-09-06: added small notch for…

Ocena
5 / 5
Polubienia
17
Pobrania
197
Wydruki
2
Wyświetlenia
974
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Slot type filament guide, useful if you print tall objects and full 1kg spool

Update 2018-09-06:

  • added small notch for easier placing of the filament in case you already put it in the extruder (needs to be sliced after print)
    Update 2018-06-16:

  • the clip and stem are slightly beefier

  • the slot shorter and wider(so it doesn't bind on full or almost emprty spool)
    I printed it with 3+ perimeters(shells) with 0.4 nozzle, 0.2mm layer height and i think 10% infill

    Works with that type of spool holder
    https://www.thingiverse.com/thing:1832235

Print instructions

Category: 3D Printer Accessories Print Settings

Printer Brand: Prusa

Printer: i3 MK2S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2mm

Infill: 5-10%

Notes:

I printed it in PLA. If you have good adhesion and your setup is printing well up to 45deg it prints without issues

Tagi