Seeed Wio Tracker L1 E-ink case with Display Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Seeed Wio Tracker L1 E-ink case with a printed Display Protector in translucent PETG and opt. holes for M2 thread insert
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix based on the Seeed Wio Tracker L1 e-ink Case by zeropt and Frey.
Protection over Readability. My remix offers to print a display protector in place. The display get a little bit blurried out, but depending on how good you are able to print the translucent material. My .3mf file is designed to print in PETG. Just use the predefined settings.
Furthermore you can use 2x M2 thread inserts to mount the backplate linked down below. If you dont like to use thread inserts, just remove the two cylinders as negative parts.
Related model below
Recommended: This nice backplate keeps the board and the battery separated from each other. It offers space for the antenna cable by a cut. Quite enough to print it with only 0.4 mm thickness.
https://makerworld.com/de/models/2332112-wio-tracker-l1-oled-case-3000mah#profileId-2548106