Picaso Designer X Pro improved guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved bowden tube guide for Pixaso Designer dual-nozzle printers
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
My original guide shattered after heavy use, broken along the filament lines, so I decided to redesign it taking this into account by adding reinforcement ribs. Also, because I use an external eSun eBox, I added a hole for a third guide, so that one bowden tube can be 'parked' on top of the printer rather than having to take it out entirely. For this to work, the side bowden guides on either side of the printer also need to be updated to hold two borden tubes rather than one.
This is printable with virtually no supports, but be careful with elephant's foot: it can create sharpness right at the point of bowden tube contact. Clip excess away with tweezers before installing!