2015 Highlander Lift Gate Latch Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fits 2015 Highlander but probably good for 2014-2019 model years
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Somehow I lost the rear lift gate latch cover for my 2015 Highlander. I purchased one from Toyota for around $27. However I thought I would try to model one. This is what I came up with and it fits pretty well.
There are two pics of installed latch covers. The one that's leather textured is the OEM Toyota part. The other one with layer lines is of course the printed one. All pics with the recessed pockets on the back are the OEM part. My model is flat front and back.
I printed with Elagoo PLA on a Flashforge 5m Pro. May want to print this in PETG as PLA may warp in the summer heat.
Sliced using Orca Slicer v2.3.2. Printed it standing on edge with two raft layers and Tree Supports.
Originally tried B-Spline curve models but settled on a LINE-CIRCLE curve profile as it was simple. Have included my FreeCAD model files for both the base profile curve and the finished part. Feel free to modify or make a better model. If you do please let me know.
If you really want to go for the 100% finished look, you could cover it with a leather contact paper type adhesive like this off Amazon.