XIAO ESP32 Internal Mount for uConsole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Internal mount for an seeed studio xiao esp32s3 or similar
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 533
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Internal seeed studio XIAO ESP32S3 (or similar) mount for uConsole. Best if used in conjunction with the HackerGadgets expansion board or AIO board with the extra headers for USB. Included is a mount for the ESP32, a mount for the HackerGadgets AC1200 USB-C WiFi card with a wire channel, and an upper mount for a zip tie to tuck away the antenna cables.
Print Settings:
Whatever your default settings are should be good
Supports needed for the wire channel on the ESP32 mount
I would recommend putting some kapton tape or similar on the bottom of the esp32 (as pictured) to make sure you don't short on the uConsole's case
This WILL interfere with the SSD if you are using the hackergadgets NVMe upgrade with a full size 2280 NVMe