RST Tractech Evo 3 Boot Toe Slider 3D Scan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A metro X laser scan of my RST tractech boot's toe slider.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
In case you managed to loose your RST Tractech EVO 3's toe slider due to the screws
(M4x5.5mm and M4x7.5mm (2.5mm allen head)) coming loose.
The model was scanned in cross laser line mode with my metro x scanner at a 0.2mm resolution. Print in Hard TPU or self lubricating filament for optimal preformance. Obviously not the same as the original metal slider but probably good enoght considering the new tractechs come with a TPU slider. The front screw is often mounted between the metal parts. If you are printing this as one piece you will have to drill out that part of the print to 4mm to insert the M4x7.5mm screw.
If you found this useful please do leave a like ;)