Ball Mount Plate for Xeneon Edge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20mm ball mounting plate for the Corsair Xeneon Edge
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a sturdy 20mm ball mounting plate for the Corsair Xeneon Edge monitor. The mount point is compatible with most 20mm ball mount systems, including the Elgato Multi Mount / Flex Arms and the Tackform 20 Series. It provides a more stable mounting point than a single screw-in ball mount.
I was frustrated with the standard ball mounts loosening and unscrewing over time from the weight of the monitor. This plate uses both available mounting points to prevent the mount from loosening due to rotation.
Requires 2 x 1/2" 1/4-20 thread bolts. The mounting holes on the Xeneon Edge are very shallow, so the length of the bolts are important. Consider adding a 1/16" washer if your bolts are bottoming out.
Print recommendations:
4 perimeters
0.2mm layer height
Dense infill (40% Gyroid, in my case)
No supports required