Pinlock Keg Post Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wrench for removing and tightening the posts on a pin-lock ('corny' or cornelius style) 5 gallon keg
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a wrench for removing and tightening the posts on a pin-lock ('corny' or cornelius style) 5 gallon keg.
The posts normally require a 13/16" socket with either 2 (gas) or 3 (liquid) slots cut out for the pins. This fits both gas and liquid posts.
If you've purchased a used keg and need to remove the posts for the first time, you will need a metal socket on a ratchet with a long handle, since those kegs usually have blown o-rings and the posts have been way over tightened to compensate.
But otherwise, this will work well for removing and tightening posts on kegs with good o-rings. If you tighten your posts down hard enough to break this tool, you will destroy your o-rings. If your keg won't hold pressure without them being tightened that far, you already have!