Flexi Orca Willy - Print-in-Place Orca – No Supports Needed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
⚠ Full access to ALL FlexiMania designs with a commercial license 👉 patreon.com/c/FlexiMania_
- Ocena
- 5 / 5
- Polubienia
- 221
- Pobrania
- 917
- Wydruki
- 1
- Wyświetlenia
- 2532
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Articulated Print-in-Place Orca – No Supports Needed
Meet Willy — a powerful and playful FlexiMania orca inspired by the iconic killer whale.
This articulated print-in-place model features smooth body movement, clean articulation and a bold ocean predator look straight off the build plate.
Perfect as a desk toy, ocean collectible, gift or standout display piece.
🔥 Features
* Fully articulated orca
* Smooth flexible body and tail movement
* Print-in-place, one-piece model
* Classic black-and-white orca design
* Optimized for FDM 3D printing
* No supports needed
* Beginner friendly
* Clean articulation and durable joints
🔧 Technical Details
* One-piece articulated structure
* Optimized joint spacing for smooth flexing
* Designed for FDM printers
* STL / 3MF files included
* AMS / MMU compatible
* Scales well (70–130% recommended)
⚠ FlexiMania Notice
This model is priced higher individually on purpose.
Full access to ALL FlexiMania designs + commercial license is more affordable with an active Patreon membership.
👉 patreon.com/c/FlexiMania_
📜 License
Personal use only.
Selling printed models or redistributing digital files is NOT allowed without an active commercial license.
To legally sell prints, you must have an active Patreon commercial membership.
💡 Pro Tips
* Looks incredible in black + white filament
* Perfect for multicolor AMS setups
* Smooth tail movement makes it highly satisfying
* Works best at 100–120% scale
3D printing settings
🖨 Printing Settings (Recommended)
* Supports: NO
* Material: PLA recommended
* Layer height: 0.2 mm
* Walls: 3 walls
* Infill: 10–15% (Gyroid recommended)
* Adhesion: Skirt recommended
* Print type: Print-in-place (do not separate parts)
* After printing: gently flex segments to fully loosen articulation