Caster wheel mounts Airseekers Tron
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is mounts to replace the omni-wheels on the Airseekers Tron for better stability
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 273
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounts to retrofit the Husqvarna Autmower/Gardena Sileno style caster front wheels for better stability/tracking. Also gives less resistance when turning so should also reduce rear wheel spin.
Note* : This is just the mount you need to get the wheels themselvs from a Husqvarna supplier or borrow them from a friend that has a newer Automower :)
The Spare parts number for the caster wheels are
Automower model (with rubber track) : 5474128-01
Sileno model (hard plastic only, cheaper) : 5893008-01
Do note, to fit these you would need to pry off the front axle covers which will most likely brake (unless you remove the top frame of the mower), they are not designed to be serviceable.
Also, the lift sensors are mounted in the Omni Wheels so you will loose that safety feature.
(Make sure to cover the end of the plug so moisture don't corrode it).
Designed to accept M5x6mm heat inserts
Recommended to print on an angle with tree supports for FDM printers.