Roman Aqueduct with space for Pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a Latin II project. The top part is the duct itself, with a 1-degree slant on the middle section of the aqueduct…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Just a Latin II project. The top part is the duct itself, with a 1-degree slant on the middle section of the aqueduct and a 1-degree slant on the bottom to promote water flow to the bottom part, which would hold the pump and extra water.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/5BVM6KSyUvF
Print Settings
Printer Brand:
MakerBot
Printer:
MakerBot Replicator (5th Generation)
Rafts:
Yes
Supports:
Doesn't Matter
Resolution:
Whatever works for you. I used 0.1.
Infill:
Preferably decently high, to prevent leakage.
Filament:
MakerBot PLA
Notes:
You can use supports for the overhanging areas, but for a quick Latin project, I decided not to.
Category: 3D Printing