1 / 1
FractalDesign Meshify C GPU aiflow guide.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an air flow guide when your GPU is too long and you have to lower the fan to have it fitting in the Meshify C
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This one appeared as a necessity to have the full flow of air going to the GPU after an upgrade to the RX6800XT and the need to lower the front fan in order to fit the card in the MeshifyC case.
Printed on Ender3 from PLA. 30% infill, thou the model is mainly outer walls. It's made of two parts that I glued together with CA glue and went over it with a flat head soldering iron set to 180C to polish the looks a little.