Liberator from Blakes 7
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A WIP model of the Liberator from Blakes 7
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Public Domain
Updated to include higher level of detail - pic shown is a model built at 1.25x scale which is the max I think you can do on a MK4
Back to the 70's with a simple model of the Liberator from Blakes 7. The model is a bit of a work in progress and I intend to further detail in time
Its sized to enable printing on a Prusa Mk4. Limiting factor is the strut height and width on the printer bed. I'd like to make it bigger but not sure how I'd make a relatively thin load bearing structure in more than two pieces - I guess I could use a stand and make the struts non-load bearing if needed.
I've taken a few liberties with the design but I'm sure Avon would be cool with that.
Apologies for originally mislabelling it - no AI was involved in this design although obviously access to Orac would have been helpful.