1 / 2
10m Air Pistol Gun Stand and Storage — zdjęcie 1
1 / 2

10m Air Pistol Gun Stand and Storage

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Gun stand with some storage for pellet tins and other equipment.

Ocena
5 / 5
Polubienia
19
Pobrania
325
Wydruki
0
Wyświetlenia
1372
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a gun stand design for a 10m Air Pistol. I found Tritschi's design and decided I wanted to take it further. In my case that ment making it into a single assembly, adding storage, making it a bit more universal, and a little bit prettier.

Files Included:

  • Rear Mount (You could use this by itself without the front mount if you don't mind it resting on the barrel or air tank.

  • Front Mount 

  • DXF file for the base plate (designed in mm)

  • DXF for the felt inserts on the rear mount  (designed in mm)

  • DXF for the adhesive to attach the mounts to the baseplate  (designed in mm)

Features: The rear mount includes pockets on the bottom to insert 8mm Diameter x 4mm High Magnets. Allowing you to secure this to steel surfaces.

I printed this in PETG-CF, but it should be good with just about any material.

  • .2 Layer Height

  • (4) Perimeters

  • 30% Infill

  • Support enabled

Tagi