1 / 6
Share C1 Lidar Scanner 3D scanned (if anyone wants to design addons) - Scanned with Einscan Rigil — zdjęcie 1
1 / 6

Share C1 Lidar Scanner 3D scanned (if anyone wants to design addons) - Scanned with Einscan Rigil

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Just a scan of the Share C1 with the Einscan Rigil if anyone needs it

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
104
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Just did a quick scan of the Share C1 so I can design some Add-ons I might need for future projects (and maybe a drone mount xD). Wanted to get the can in the wild should anyone also need it. At least the battery is similar to the Share S20 and S20 SE.

## Scanning

Scanning was done with the Einscan Rigil at 0.15mm resolution in wireless mode (to use the 120 FPS scan speed, simply faster than standalone for high resolution). Battery and protective cover were scanned without any spray. For the core scanner spray was used on the lenses and lidar unit. All parts were scanned from two sides and aligned with automatic feature alignment. Parts were placed on a bed of marker geometries and marker plates.

Tagi