Reinforced replacement part for toilet cistern push button (Brand:Gala)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printed replacement part designed to replace the broken inner holder of a toilet cistern push button.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
This model is a reinforced replacement part for the push button mechanism of a Gala toilet cistern.
The original plastic part had broken, leaving the flush button without proper support and causing it to become loose, unstable, or misaligned on the cistern lid. I designed this version from scratch to replace the original part and keep the push button correctly positioned.
The geometry has been reinforced compared to the original part, especially in the areas that receive pressure or torsion every time the button is pressed. The goal was not to create an exact copy, but a stronger and more functional version that can better withstand everyday use.
Although this design has been tested on a Gala cistern with a top-mounted chrome push button, it may also be useful for other toilet cisterns with a similar top push button. Many cistern mechanisms use mounting holes close to 38–40 mm, but not all systems are the same. For this reason, I recommend checking the push button diameter, thread, available height, and mounting system before printing.
It is designed to be 3D printed and mounted directly onto the existing push button assembly. This part does not replace the complete flushing mechanism; it only replaces the holder that keeps the button in position.