1 / 7
Handle & Flat Wall Parts for Compost Tumbler by radare — zdjęcie 1
1 / 7

Handle & Flat Wall Parts for Compost Tumbler by radare

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I flattened the parts that connect to the barrel and made a handle that will hold a 1/4" hex bolt recessed. There is…

Ocena
0 / 5
Polubienia
2
Pobrania
8
Wydruki
0
Wyświetlenia
260
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I flattened the parts that connect to the barrel and made a handle that will hold a 1/4" hex bolt recessed. There is room in there for a spacer to accommodate different length bolts.

I greased the bearings and it spins super slick even when full. I will be cutting a square hole in the handle to push the bar through the crank to give it more support. It definitely needs it.

This thing works great! I am so thankful to the original author for putting it out and inspiring me to make one.

Printed with PETG at 50% infill.

The remainder of the parts needed for this project can be downloaded from the original author here: https://www.thingiverse.com/thing:4308324

Print Settings

Printer Brand:

FlashForge

Printer:

Creator Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

50%

Filament: Generic PETG Red

Category: Outdoor & Garden

Tagi