Electrical cable support for Metabo AS20
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Using the body of the vacuum cleaner to install a support for the electrical cable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
On the rear side of the vacuum cleaner body, there are some plastic supports (see picture). As the electrical cable is long (good point) and there is no place to keep it, I designed a support to wrap it. It is engaged in the body supports without glue.
Made in red to comply with the vacuum cleaner body and in PLA+ as there is no constraint on it.
No special requirements except supports. As 3D printing is subject to dimension variations, I added a test piece to check if some adjustment would be necessary for correct assembly.