TPU compatible MMU3 extruder for the MK3S+/MK3.5S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a TPU compatible MMU3 extruder for my MK3S+, so now I can print multicolor TPU prints.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
***PLEASE CONTACT ME IF YOU HAVE ANY QUESTIONS, i'm not good with instructions but i'm willing to help you!***
I designed this mod for my beloved MK3S+ after I tried every available „chimney” and extruder mod for this printer. Although I really liked my setup, the structure of the extruder and chimney made the color-changing unreliable compared to the competitors, and of course it was not compatible with TPU.
The assembly has the following upgraded parts:
Idler
Motor Plate
Extruder Body
Chimney
Chimney Base
You will need an additional D3x25 mm metal PIN, other than that, just original hardware is required!
Please check the attached instructions!
For the MMU body itself, you will need this mod from an other creator:
2026.05.26.: Some improved parts added (V2)