Filament Alarm From Solder Practice Kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had an old Elenco soldering practice kit sitting in my closet that I wanted to do something with, so I made a…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I had an old Elenco soldering practice kit sitting in my closet that I wanted to do something with, so I made a filament alarm from it.
The filament feeds through the hole on the side and when it runs out, the 2 leads that it was separating will connect setting off the alarm.
There is a hole in the top to reach the volume knob located on the board.
I had to do a bit of trimming to get it all to fit and needed to tape the plates together to get it to work reliably. If I revisit it, I'd make it so they all snap together.
You can see a quick demo video here: https://youtu.be/nyVRwVZCkmM
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Category: 3D Printer Accessories