glove80 fixed angle tenting legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
minimal version of portable glove80 tenting with modified legs in various angles
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 1
- Wyświetlenia
- 113
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Minimal version of my glove80 tenting v2.
About
This version consists of modified legs without a frame, which I found to be stable enough. My prints stayed attached to my glove80 when lifting without any adjustments, but to secure them 5 mm x 3 mm round magnets can be inserted into the top of each leg to be used with magnetic glove80 legs, which can also hold 1 magnet each.
10 mm x 3 mm round rubber feet are recommended and their height is taken into account in the overall height. Corresponding slots to prevent them from slipping are at the bottom of the legs. The tenting works without, but will be less stable and slide more.
Tenting angles: 12º, 15º, 18º, 20º
Positions (back: b, center: c, front: b) are written on each leg along with the corresponding tenting angle.
Magnetic feet
The magnet feet also use 10 mm x 3 mm round rubber feet, similar to the original ones of the glove80.
To attach the legs, an M4 threaded insert is needed for each leg.