Model of Marcel Duchamp's Bottle Rack by williamCromar: Full Scale Edition
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Full-scale plating of Model of Marcel Duchamp's Bottle Rack by williamCromar in a Club-exclusive marketplace critique
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Standard Digital File License
This digital asset is a refined, full-scale manifestation developed as part of an instructional research initiative supported by a faculty grant from Penn State Abington and the Abington MakerSpace. It expands upon the geometric parameters established in the public open-access reference collection Prêt à Faire: Printable Readymade Models.
1 | Concept & Provenance
This asset is an autonomous work of conceptual art: a 1:1 scale digital study of the physical parameters underlying the famous 1914 Bottle Rack (originally titled Porte-bouteilles) by Marcel Duchamp. The historical original work is lost; this model stands as an independent, transformative interpretation that cross-references the public dimensional layout documented by the historical 1964 Arturo Schwarz configuration.
Unlike the Bicycle Wheel that preceded it, the historical 1914 artifact was selected as an unaltered industrial object, representing a foundational shift in the Readymade concept. This project explores the distributed accessibility of those historical concepts by making the underlying structural geometry downloadable and reproducible through contemporary digital fabrication networks. While the physical print may resemble a familiar historical motif, the conceptual artwork resides in the publication and curation of the digital models themselves: the digital architecture, the distributed network framework, and the critical marketplace critique. The printed object is a physical manifestation, not the artwork proper.
Explore the historical context of the referent at:
Historical references analyzed:
![]() Philadelphia | ![]() Private collection | ![]() Paris |
The historical visual motifs analyzed here have been famously referenced, appropriated, or commented upon by many contemporary practitioners. Relevant precedents include André Raffray’s graphite shadow studies, Ola Korbańska’s structural reconfigurations, and Jeff Koons’ integration of the motif into his Gazing Ball series.
![]() André Raffray, Shadow of the “Bottle Rack” by Marcel Duchamp, 1993 | ![]() Ola Korbańska, 6 CIRCLES / 4 LINES / 50 'L', 2016 | ![]() Jeff Koons, Gazing Ball, 2016 |
2 | Scope & Scale
As a work of Post-Appropriation and remix praxis, this model is an independent digital manifestation optimized specifically for full-scale FDM fabrication, structural durability, and mechanical assembly. The geometry deliberately adapts historical visual motifs into a printable medium, celebrating the physical deviations required by the additive manufacturing process as part of the artwork's transformative expression:
This file is optimized explicitly to be printed at full historical scale.
Changing scale is not recommended, as it will compromise tolerances, bearing fits, and structural behavior.
Most parts require a large-format printer such as a Prusa XL.
A smaller, scalable open-access reference version is available at this link.
3 | Printing Notes
3.1 | General Recommendations
Use the supplied 3MF files with preconfigured orientations and settings.
These settings were validated on a well-tuned Prusa XL using dehydrated filament.
STL and STEP files are provided for users who wish to experiment.
If creating your own build plates, print extra rivet pieces.
File Formats
[Model_Name].3mf/.stl→ Best for quick printing. Pre-meshed at a high resolution, these files will slice exactly as they appear in the smooth website preview.[Model_Name].step→ Best for remixing and maximum quality. These files contain precise CAD data. Note: Ignore the blocky look in the online browser viewer; it will download and slice with perfectly smooth mathematical curves inside your slicer.
Part Naming Convention
Leading number: Part ID (matches tables below)
Name of part with orientation (left or right, front or rear, top or base)
Trailing number: Quantity to print (if no trailing number, print one)
Designed Tolerances
Friction fit: ~0.1 mm
Tight glue joints: ~0.2 mm
Moving parts: ~0.4 mm
Observed Issues in Our Prototyping
No significant shrinkage was observed, but occasionally we struggled with elephant-footing on the rivets. Adjusting settings to avoid this helps, but a light sanding or filing can achieve a better fit.
Failures observed on the long leg parts were mitigated by adding a helper disk to each end.
When prototyping for fit, use the filament you intend to use for the final product. We found significant differences among the filaments we tested below.
3.2 | Material Recommendations
For filament, consider the following:
Metallic Silver:
Polymaker Panchroma Metallic Silver PLA
Brass (for the optional plaque):
Amolen Aged Brass Silk PLA
Additional materials include adhesives: PLA solvent (e.g., Gloop, Weld-On 16) and/or fresh, slow-dry gel CA.
3.3 | Printing Statistics
Full-Scale Print
Total steel filament: ~415 g
~35 hr print time
5 build plates
Optional brass plaque:
Total brass filament: ~2 g
~10 m print time
1 build plate
4 | Parts Breakdown
ID# | Name | Quan | Plate in 3MF |
|---|---|---|---|
01 | First ring | 1 | 1 |
02 | Second ring | 1 | 2 |
03 | Third ring | 1 | 1 |
04 | Fourth and sixth ring | 2 | 2, 4 |
05 | Fifth ring | 1 | 3 |
06 | Leg top | 4 | 4 |
07 | Leg base | 4 | 6 |
08 | Rivet head | 26 * | 6 |
09 | Rivet 7.5mm | 5 * | 2 |
10 | Rivet 6.75mm | 20 * | 6 |
11 | Rivet 4.75mm | 6 * | 4 |
12A | Rivet 12mm ** | 1 | 4 |
12B | Rivet 12mm | 4 * | 4 |
13 | Hook with rivet | 5 | 6 |
14 | Plaque *** | 1 | 6 |
* Extras are plated in the 3MF file.
** Special rivet for the hook on the second ring that is NOT attached to a leg.
*** Optional for higher fidelity with the 1964 edition, which features a brass plaque.
5 | Assembly Notes
Follow these general guidelines:
Glue leg halves together for a total of 4 legs.
Start by gluing the first ring to the 4 legs using rivet and rivet head pieces, then move up to the next ring. When using rivets:
Use the 4.75mm length to join ring ends.
Use the 6.75mm length to connect rings to legs (wherever there is not a hook).
Use the 12mm length to connect rings to legs wherever there IS a hook at a leg.
Use the special 12mm length (embossed with 12A) for the one hook that does NOT attach at a leg, on the second ring.
Take care to place the first ring in the correct orientation: the direction of the overlap should match the images.
For precision, use a carpenter's square or drafting triangle to keep the work square while assembling the first ring to the legs.
As you move up the model, use the image illustrations to note the position of the ring end joint relative to the legs.
Notice that rings 4 and 6 are identical.
Save the hooks with rivets for the last gluing step.
Take your time, and use clamps and/or removable tape to secure every joint until cured. It may take a few days to assemble, allowing the glue to cure properly.
5.1 Adhesives
Use PLA solvent (e.g., Gloop) or fresh gel CA
Clamp or compress until fully cured
5.2 Tools
Clamps, removable tape
Small brushes, trays for gluing
Needle or paper clip (for gluing small spaces)
#11 craft knife
Needle-nose pliers, tweezers
Color markers or tape for labeling spokes
5.3 Safety
Standard PPE: Nitrile gloves, eye protection
Ventilation when using solvents
Remember, you are assuming all risk when using these materials and files, so stay safe!
6 | Presentation Notes
Place this fabricated physical manifestation on a table or pedestal at a comfortable viewing height, allowing spectators to interact with the structural geometry from all angles.
7 | Support
Access to this file archive facilitates your active engagement with the project's broader marketplace critique. We provide direct technical support through the platform messenger to assist project participants with any advanced file manipulation, structural tolerances, or slicing inquiries. Thank you for participating in this distributed institutional inquiry!
8 | Change Log
28 JUL 2026 | Uploaded photographic documentation of the fully assembled physical prototype fabrication to illustrate completed component fits.
28 JUN 2026 | Re-ordered parts listings for a better previewing experience. While the STEP files are mathematically precise, the browser renders them janky, so STL files are seen first.
Disclaimer
Prêt à Faire is an autonomous artistic project, scholarly reference work, and institutional critique by williamCromar, supported by a faculty grant from Penn State Abington with fabrication assistance from the Abington MakerSpace. This project is entirely independent and maintains no formal affiliation, endorsement, or sponsorship with Association Marcel Duchamp, the Estate of Marcel Duchamp, ARS, ADAGP, or any curating museum. When referencing or sharing this work, users must maintain a clear distinction in authorship and nomenclature from the historical referent. Cite this asset as: Model of Marcel Duchamp’s [Object Name] by williamCromar. Basic models are available under a CC BY-NC-SA 4.0 license; premium tiers operate under a separate commercial framework. For full conceptual and legal text, visit https://sites.psu.edu/pretafaire/disclaimer-and-licensing/





