PS Vita Charging Dock Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo, then cut out a…
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 417
- Wydruki
- 5
- Wyświetlenia
- 2025
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I took the PS Vita Stand by LordLeXaT and cleaned up the front and added a different PS Vita logo, then cut out a 2-stage channel down the center and added a channel to run the cord. The bottom half of the hole is large enough for the USB tip to fit through, but only the top half will fit the Playstation end of the cord, so it will sit high enough up for the dock to make a connection.
I used a brim to guarantee flat corners but no other support was needed.
I've also posted a version with the logo recessed instead.
The source files from TinkerCad can be found here: https://www.tinkercad.com/things/8mmJPf2FI3b-vita-stand/editv2
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
No
Supports:
No
Resolution:
High
Infill:
20
Category: Video Games